Feita Bonita
Made Beautifully

Posts Tagged ‘Baby’

Inexpensive Wall Art for Baby (Tutorial)

Lyds had something on each of her bedroom walls, except for one, and I had no idea what to do.  I came across this site and decided it would be a easy, free, and quick way to dress up her wall.  And if it didn’t work out, hey, it was free because I had all the supplies on hand, and non invasive, so it can be removed anytime.

decorations i made for Lyds's room

You need:

  • Scrapbook paper (any square size: 12×12, 9×9, etc)
  • Hot Glue Gun
  • Adhesive Wall Putty

Directions:

  1. You want to use two pieces of scrapbook paper that are the same square size.  I used 12×12, 9×9, and 6×6.
  2. Fold the up and down, like a paper fan.
  3. Crease each folded piece of paper in half.
  4. Glue the outer strips to each other to make a semi circle.  Do the same thing on the other piece of paper.
  5. Next, glue them together on the outsides.
  6. Get adhesive wall putty, and roll it into a ball about the size of a ping pong.  Put it on the wall.  Stick the middle of the decoration into the putty, and you’re done!

Have you done any neat wall art you want to share?

Share

How to Make: Baby Legwarmers (Tutorial)

tipster tuesday

I made Baby Legwarmers in two different ways.  The first way: a knee high sock went from this to this.

This way took less time than the second way, but it didn’t look as good, and the

legwarmers kept sliding off Abs’s thighs at church.

So, the tutorial is going to be how to make legwarmers that look the top 3 legwarmers in this picture:

Supplies

  • Ladies Knee High socks
  • Thread

Directions

  1. IMG_5291Cut the sock right above the heel.
  2. IMG_5290 Then cut off a 3 inch section of the heels.  Then cut off the toes.  You don’t need those anymore.
  3. IMG_5289IMG_5292Using the middle pieces: turn them inside each other, wrong sides together.  You’ll use this for the bottom cuff.  I liked mine to be about the side of the existing cuffs, so, I cut the middle piece to about 3 inches.
  4. IMG_5282Now just place the leg pieces INSIDE each cuff, raw edges lining up.
  5. IMG_5281Pin together and sew around the raw edges with a zigzag stitch for stretch.
  6. Turn them out the correct way, and you’re done!

IMG_5294

Share

Toddler Dress from Adult Shirt Tutorial

So far, I’ve made these two dresses from old shirts I had.  They are definitely not perfect, but Abs likes them, so I guess that’s what matters.

This was a super simple project.  Can’t believe I didn’t make one sooner.  Here’s a tutorial for you:

  1. Lay a dress or shirt of your toddler’s on top of the shirt you’re going to cut.  Make sure the necklines match up and fold the sleeves in on the toddler shirt.
  2. Draw around the top item with disappearing ink pen, and then, cut around the lines.
  3. Cut around the neckline.
  4. Then cut the back side of the dress to be closer to the neckline
  5. Sew up the sides with a straight stitch and then a zigzag stitch.
  6. Then sew around the arm holes and stitch the back part, too.
  7. Then, cut the neckline in the middle on the back part (where the tag used to be), and sew the ends onto the back of the dress, to make spaghetti straps.

You’re done, unless you want to embellish more.  The first one, I decided to make some flowers with the left over fabric.  (I was a little worried that the flowers wouldn’t hold up in the wash, but they stayed perfectly intact!)

For the second dress, I made ruffles.  I’ve cut out 4 other shirts, but I haven’t gotten around to sewing them into dresses, yet.  Any ideas for other ways to dress up the dresses??

Oh, I learned from making the first one that I should’ve make the bottom part of the dress more like an A-line.

I also made these bows to match the dress themes:

Let me know if any of this is unclear or if you have any questions.

Share

A Car Seat Tent/Cover

Several women have commented on Lyds’s car seat tent, so I’m finally getting around to doing the tutorial.  It’s SUPER easy!

I remember going out with Abs and getting frustrated, trying to keep the sun completely out of her eyes with the car seat sunshade.  And don’t even get me started about when it would rain.  Also, the wind, oh the wind where I live is killer and blankets would always blow off, and it was a hassle to hold her car seat, while trying to keep a blanket over her.  So, thank goodness I discovered an awesome way to cover up your newborn with a car seat tent.  Here’s what you need to have on hand to make one yourself . . .

Supplies

  • about 2 yards total of fabric (if you want it to be reversible, you can use 1 yd of one color and 1 yd of another color, or you can simply use two yards of the same fabric)
  • thread
  • velcro (not the adhesive kind; buy the kind for sewing)

Okay, so I started typing up a tutorial for this but erased it all, but I don’t have the patience to remember what all I did, since it’s been about 4 months since I made this.  So, I’ll just leave you some links to some car seat tent tutorials that will be helpful.  Also, here are some of my measurements that might help you (keep in mind that this won’t make sense to you until you look at the tutorial links):

  • I cut 2 inches off the bottom; it left my fabrics to be 36 L x 42 W (35 long when sewed)
  • For my velcro straps: soft side up, facing back (velro down, facing front) 7-8 inches long
  • When I measured the cloth front to back, I sewed the straps directly in the middle lengthwise (21 inches) and measured side to side; 12.5 from outside (7 ¼ in b/t each other).

Share

How to Make a: Crinkle Square Mini Blanket with Taggies

Here’s the tutorial for how to make a crinkle square mini blanket with taggies like the one below for a baby.  It’s super easy, quick, and doesn’t cost much.  If you don’t have ribbon on hand, that might be your biggest expense. 

Supplies

  • thread
  • 2 squares of flannel (I used 9×9 inches)
  • ribbons cut to about 4 inches long and folded in half (I used 4 big pieces, 4 medium pieces, and 4 skinny pieces)
  • crinkly sheet/package, the same size as your flannel (I used a wrapper from a sample diaper I got in the mail).  Some other options: wipes package, microwave popcorn wrappers, chips bag, clear gift wrap . . . Just make sure that you cut your flannel pieces to whatever size your crinkle sheet ends up being

Directions

  1. Put one piece of flannel right side up and pin ribbons along the edges with the cut sides off of the flannel.  between the two pieces of material (wrong sides together).
  2. Put the second flannel sheet on top of the ribbons right side down.
  3. Put the crinkle sheet on top of the flannel and pin all layers together.
  4. Sew along all the edges– except, make sure to leave a big enough section not sewn so that you can turn the blanket right side out.  Take the pins out.
  5. After sewing, turn the blanket right side out.
  6. Then, sew all the way around the square, and you’re done!

Share

How to Make: Fabric Headbands

Back in November, we decided to grow my daughters hair out, but her hair kept getting in her eyes.  Bows come in and out easily, so I decided I’d try to make her some headbands.  You could make some for yourself, too, and your daughter might be extra excited about wearing headbands, just like Mommy.

Materials Needed:

  • material
  • an elastic hair band/ponytail holder without the metal
  • coordinating thread

Instructions

  1. Measure around your toddler’s head to the nape of her neck.
  2. Cut your material to the appropriate size and iron flat.  [Cut a rectangle that is double the width of what you want your headband to end up, plus about 1/2 in for seam allowance and 3 inches less than measurement you got from step 1.  I think I cut mine 3.5 x 15.5inches.  If you want it to be reversible with two different patterns, cut accordingly.]
  3. Measure in on the bottom ends in about 1/2 “  on each side and mark, draw a line up to the top corners and you will have a tapered rectangle.
  4. Fold right sides together “hot dog style” and iron flat.
  5. Then pin together and sew around, but leave a “U shape” opening in the bottom, as if you were sewing a pillow.
  6. Turn tube of fabric inside out and iron flat.  Also, fold a 1/4 inch or so on each end and iron down.
  7. Put elastic pony tail on one end inside the flap created in step 6.  Fold the 1/4 over the pony tail, and sew straight down.
  8. Do the same with the other side.
  9. And you’re all done.

I made the headband in the pictures and a pink one.  I also made a reversible one: one side black and one side red.  Abs loves them.  Let me know if you have any questions.

Share